The commercially available oral rinse vs. curcumin photosensitizers in an artificial mouth model mimicking their use after meals on early colonizers single species biofilm: An in vitro study.

BACKGROUND: Commercially available oral rinses contain active ingredients with concentration that is claimed by manufacturers to be effective as antiplaque agent. To date there has been no mention of the effect of oral rinse on the adherence of early plaque colonizers in plaque formation and the concentration to be used before/after meals. OBJECTIVE: The chief aim of the study was to evaluate microbial retention on the salivary pellicle on treatment with oral rinses (CHX & EO)/PS (mimicking after meals use of mouth wash/PS). METHODS: Noordini's Artifical Mouth model was used for developing the single species biofilm with early microbial colonizers of oral biofilm (A. viscosus, Strep. mitis and Strep. sanguinis respectively). The microbial retention on use of oral rinses comprising of CHX and EO as an active ingredients respectively was compared with Curcumin PS. For evaluating the microbial retention, the pellicle with microbial inoculation was developed on the glass beads in the mouth model. Subsequently the respective single specie biofilm was exposed to the mouth wash and PS after inoculation. It mimicked as use of mouth wash/PS after meals. The bacterial count in the dental biofilm was evaluated on serial dilution (CFU/ml). Sterile deionized water was used as a negative control. For qualitative analysis, Scanning electron microscope (SEM) was used to evaluate the microbial count. RESULTS: From the data it was observed that for the treatment of single species experimental biofilm with commercially available mouth rinses (CHX & EO) and PS (curcumin), there was significant retention for S.mitis, S.sanguinis and A.viscosus. There was no significant difference observed between PS and CHX treated single species biofilm. Whereas a significant difference was observed between EO treated biofilms and CHX/PS treated biofilms (p⩽ 0.05). CONCLUSION: It can be concluded from the results that curcumin PS and CHX should not be used after meals whereas EO containing mouth rinse can be used to maintain the oral mocroflora.

Clinical and radiographic peri-implant outcomes with riboflavin loaded Poly-L-glycolic acid nanoparticles incorporated in aloe-vera gel treating peri-implantitis in chronic hyperglycemic patients.

AIM: The objective of the current study was to compare the effectiveness of antimicrobial photodynamic therapy (PDT) versus Poly-L-glycolic acid nanoparticles loaded riboflavin incorporated in aloe vera gel (PGA/RF/AV) on periimplant parameters and bacterial counts in chronic hyperglycemic patients having periimplantitis. METHODS: One hundred and two diabetic patients undergoing mechanical debridement (MD) were equally divided into three groups: Group 1: PGA/RF/AV+ MD, Group 2: PDT + MD, and Group 3: MD alone. Periimplant parameters [Bleeding on probing (BoP), probing depth (PD), plaque index (PI), marginal bone level (MBL)] were recorded in all three groups. Periimplant plaque samples were studied to record the levels of Tannerella forsythia (Tf) and Porphyromonas gingivalis (Pg). The recordings were taken at baseline, 3 months and 6 months post treatment. RESULTS: All three groups showed a reduction in severity of periimplantitis measured in terms of PD, PI, MBL and BoP. A statistically significant reduction in PD, PI and MBL was found in patients in Group 2 whereas participants of Group 1 were found to have a significant decrease in BoP. A statistically significant decline in the numbers of both the bacterial species was seen in Group 2 at the three-month follow-up whereas at the six-month follow-up, a statistically significant reduction was observed in treatment Group 2 in the levels of Tf species only. CONCLUSION: Riboflavin-loaded nanocarrier incorporated in aloe vera gel showed greater clinical efficacy than PDT alone in the treatment of periimplantitis in chronic hyperglycemic individuals.

Modulation of implants PEEK to composite resin shear bond strength and surface roughness on pre-treatment with contemporary air abrasion techniques vs photodynamic therapy vs conventional diamond grit bur.

AIM: The chief aim of the study was to determine/equate the surface roughness (SRa) and shear bond strength (BS) of pretreated PEEK discs with contemporary air abrasion techniques, photodynamic (PD) therapy by curcumin photosensitizer (PS) and conventional diamond grit straight fissure bur adhered to the composite resin discs. MATERIAL AND METHOD: Two hundred discs of PEEK were prepared of 6 mm × 2 mm × 10 mm dimension. The discs were randomly divided into five groups (n = 40) for treatment, Group I: treatment with deionized distilled water (control group); Group II: PD therapy using curcumin PS; Group III: discs treated and abraded with air-borne particles (ABP) silica (30 µm particle size) modified alumina (Al); Group IV: ABP of alumina (110 µm particle size); and Group V: The PEEK were finished with 600-µm grit size straight diamond cutting bur installed in high speed hand-piece. The surface profilometer was used to evaluate the values of surface roughness (SRa) of pretreated PEEK discs. The discs were luted and bonded to discs of composite resin. The bonded PEEK samples were placed in Universal testing machine to evaluate shear BS. The type of BS failure for PEEK discs pre-treated with five regimes respectively was evaluated under stereo-microscope. The data was statistically analyzed using one-way ANOVA and the comparisons between mean values of shear BS were evaluated by Tukey's test (ρ≤0.05). RESULTS: The PEEK samples pre-treated with diamond cutting straight fissure burs displayed statistically significant highest value of SRa values (3.258± 0.785 µm). Similarly, the shear BS was observed to be higher for the PEEK discs pre-treated with straight fissure bur (22.37±0.78 MPa). A comparable difference but not statistically significant difference was observed between PEEK discs pre-treated by curcumin PS and ABP-silica modified alumina (ρ ≥ 0.05). CONCLUSION: PEEK discs pre-treated with diamond grit straight fissure bur displayed highest values of SRa and shear BS. It was trailed by ABP-Al pre-treated discs; whereas the SRa and shear BS values for the discs pre-treated with ABP-silica modified Al and curcumin PS did not show competitive difference.

In Vitro Evaluation of Lithium Disilicate Endocrowns and Post and Core Crowns-A Systematic Review.

The aim of this systematic review was to summarize the results of the studies that have compared the physical and mechanical properties of lithium disilicate (LDS) endocrowns constructed for posterior teeth to those retained by post-and-core retention systems. The review was conducted following the PRISMA guidelines. The electronic search process was conducted on PubMed-Medline, Scopus, Embase and ISI Web of Knowledge (WoS) from the earliest available date till 31 January 2023. Additionally, the studies were assessed for their overall quality and risk of bias using the Quality Assessment Tool For In Vitro Studies (the QUIN). The initial search resulted in 291 articles, out of which, only 10 studies met the eligibility criteria. In all studies LDS endocrowns were compared with various kinds of endodontic posts and crowns made from other materials. There were no definite pattern or trends observed in the fracture strengths of tested specimens. There was no predilection observed in failure patters among the experimental specimens. No predilection was observed in the fracture strengths of LDS endocrowns when compared to post-and-core crowns. Furthermore, no differences in failure patterns could be observed when both types of restorations were compared. The authors propose standardized testing of endocrowns against post-and-core crowns in future studies. In conclusion, long-term clinical trials are advocated to compare the survival, failure and complication rates of LDS endocrowns and post-and-core restorations.

Use of final irrigants MTAD, Salvedora Perscia, Malachite green, and Ti-sapphire laser on push-out bond strength of Zirconia post.

AIM: Evaluation of the push-out bond strength (PBS) of zirconia post-bonded to radicular dentin after using different final irrigants (MTAD, Malachite green (MG), Ti-sapphire laser and Salvadora persica (S.persica). MATERIAL AND METHOD: Forty human permanent single-rooted were decoronated above the cement-enamel junction. An experienced endodontist performed all the root canal instrumentation using ProTaper universal rotary files. Canals were irrigated using 5.25% NaOCl solution followed by EDTA as a final sterilant. Obturation with gutta-percha using AH Plus sealer was performed. Post-space preparation was completed using Gates Glidden and specimens were randomly assigned to four groups based on the final disinfectant received (n=10). Group 1: 5.25% NaOCl + MTAD, group 2: 5.25% NaOCl + MG, group 3: 5.25% NaOCl +Ti-sapphire laser, and group 4: 5.25% NaOCl + S. persica. The chemically polymerized resin was used to lute zirconia posts. PBS and failure mode analysis were performed using a universal testing machine and stereomicroscope at 40X magnification. Data were compared between the two groups with 95% CI using one-way analysis of variance (ANOVA) with the Tukey post hoc test. p=0.05. RESULTS: Group4(5.25% NaOCl+ S.persica) specimens demonstrated the maximum (8.94±0.14 MPa) bond strength. Conversely, the apical third of Group 2 (5.25% NaOCl+ MG) (2.87±0.15 MPa) samples revealed the minimum bond strength scores. Intergroup comparison exposed that Group 1 (1.3% NaOCl+ MTAD), Group 3 (5.25% NaOCl+Ti-sapphire laser), and Group 4 (5.25% NaOCl+ S. persica) at all three-thirds unveiled no significant difference in PBS (p<0.05). CONCLUSION: Ti-sapphire laser and Salvedora Persica possess the potential to be used as a final root canal irrigant to improve the push-out bond strength of zirconia post-to-root dentin.

Micro Tensile bond strength and microleakage assessment of total-etch and self-etch adhesive bonded to carious affected dentin disinfected with Chlorhexidine, Curcumin, and Malachite green.

AIMS AND OBJECTIVES: Assessment of micro tensile bond strength (microTBS) and micro-leakage scores of total-etch adhesive (TAE) and self-etch adhesive (SAE) bonded to carious affected dentin (CAD) sterilized using different cavity disinfectant (curcumin photosensitizer (CP) and malachite green (MG) and Chlorhexidine (CHX) in comparison to no disinfection (ND) control group. MATERIALS AND METHODS: One hundred and twenty human molars having International Caries Detection and Assessment System (ICDAS) scores of 4 and 5 were included. Visual inspection, dental explorer hardness testing, and caries detector solution using 5% basic Fuchsin dye solution was applied to dentin to identify the CAD surface. All the specimens were divided into four groups (n = 30) according to the cavity disinfectants used. Group A: 2% CHX, Group B: CP, Group C: MG, and Group D: ND. Each group was further divided into two subgroups (n = 15) based on the adhesion protocol. Groups A1, B1, C1, and D1 were held using TEA, and groups A2, B2, C2, and D2 were adhered using SEA system. The composite material was then built in 2 mm increments and then cured with light. MicroTBS and failure mode assessment using a universal testing machine (UTM) and stereomicroscope at a 40X magnification was performed on 10 samples from each subgroup. The microleakage assessment was performed using a dye penetration test on five samples from each group. ANOVA and Tukey post-hoc tests were used to compare means and standard deviation (SD) of bond strength and microleakage (p < 0.05). RESULTS The maximum microTBS was displayed by A1= CHX and TEA (13.28± 1.01 MPa). The lowest bond scores were demonstrated by C2= MG and SEA (5.98±0.44 MPa). The highest micro-leakage was exhibited by C1= MG and TEA (58.32 ± 2.11 nm). Whereas, the lowest micro-leakage values were displayed by A2= CHX and SEA (24.34± 1.11 nm). CONCLUSION: Chlorohexidiene displayed better bond strength and the lowest microleakage scores with Total-etch adhesive and Self-etch adhesives when used as a cavity disinfectant. Total-etch adhesives performed better in terms of microTBS scores whereas self-etch adhesives displayed superior seal ability within the same disinfectant group.

Impact of temporomandibular disorders on oral health-related quality of life: A systematic review and meta-analysis.

BACKGROUND: The management of temporomandibular disorders (TMDs) requires a comprehensive approach that considers multiple factors, including the impact of oral health-related quality of life (OHRQoL). Through this investigation we aim to assess the impact of OHRQoL played in a TMD-afflicted individual. METHODS: Using keywords relevant to our research, such as "Oral health related quality of life," "Oral hygiene," "Temporomandibular joint" and "Temporomandibular disorders," a comprehensive search across multiple online databases was carried out, yielding a total of 632 studies at the preliminary stage of the review. Modified New Castle Ottawa scale was used to assess the quality of studies included. RESULTS: Eight studies were included in the review, out of which six were eligible for further meta-analysis. The studies included in this review employed various OHRQoL measures, including the Oral Health Impact Profile-14 (OHIP-14), the Short-Form 36 Health Survey (SF-36) and the OHIP- 49. All the studies demonstrated significant effect of TMDs on the OHRQoL of the target population under study. CONCLUSION: The impact of OHRQoL on the management of TMD was deemed to be significant. The comprehensive management of TMD should consider the impact of the condition on the individual's daily life and incorporate interventions that address both the physical and psychological aspects of the condition. By improving OqL, individuals with TMD can experience improved overall well-being and quality of life.

Therapeutic efficacy of adjunctive photodynamic therapy in the treatment of denture stomatitis.

BACKGROUND: The present report assessed the efficacy of curcumin-mediated photodynamic therapy (CUR-mediated PDT) as an adjunct to antifungal gel treatment by evaluating the salivary interleukin-6 (IL-6) and matrix metalloproteinases-8 (MMP-8) levels together with Candida species counts in denture stomatitis (DS) patients. METHODS: In total, 50 DS subjects were randomly categorized into 2 groups: Group-1: subjects who received the antifungal gel treatment and Group-2: participants who received CUR-mediated PDT. The Sabourad Dextrose Agar and CHROMAgar were utilized for evaluating Candida species counts, while the Enzyme-Linked Immunosorbent Assay was employed to estimate the salivary levels of IL-6 and MMP-8. All clinical evaluations were performed at the baseline, 1 month, and 2 months. RESULTS: In total, group-2 subjects showed a significant decrease in Candida albicans (C. albicans) counts on both follow-ups (i.e., 1-month and 2-month) than group-1 participants. C. krusei count also reduced in group-2 subejcts than group-1 participants at the 2nd follow-up as compared to the baseline, nevertheless, a slight increase in C. krusei count was noticed in group-2 subjects at the 2nd follow-up than the 1st follow-up. The salivary IL-6 and MMP-8 levels in both groups reduced significantly at both follow-ups than the baseline. According to the stepwise logistic regression analysis, no statistically significant correlation was observed between Candida species count and other parameters such as age and gender of the patient, duration of DS, and frequency of treatment(s). CONCLUSION: CUR-mediated PDT is an efficaciousness therapeutic modality for alleviating Candida species counts on the surface of denture and the palatal mucosa, as well as improving the salivary IL-6 and MMP-8 levels in DS patients.

Clinical efficacy of 5-aminolevulinic acid-mediated photodynamic therapy versus topical antifungal agent and surgical excision for the treatment of hyperplastic candidiasis.

BACKGROUND: Hyperplastic candidiasis (HC) is a chronic infection of oral mucosa caused by Candida. Owing to its potential for malignant transformation, its intervention requires attention. Conventional surgical resection might lead to irreversible damage and impact the patient's quality of life. Hence, this study aimed to evaluate the clinical efficacy of 5-aminolevulinic acid (5-ALA)-mediated photodynamic therapy (PDT) alone and in combination with topical antifungal therapy (i.e., nystatin [combination therapy]) in comparison with nystatin and surgical resection for the treatment of HC. METHODS: Forty subjects with clinical and histopathological diagnoses of HC were included in the study. Four study groups, with 10 participants each, were formed as follows: Group-I - receiving antifungal agent [nystatin]; Group-II - receiving surgical resection; Group-III - receiving PDT; and Group-IV - receiving 5-ALA-mediated PDT and nystatin [combination therapy]. Salivary and mucosal samples were collected for the quantification of Candida albicans and the treatment responses to different interventions were recorded at week-4, week-6, and week-8 after finishing therapies. RESULTS: At the 3rd follow-up (i.e., at end of the 8th week after the interventions), complete improvement in 3 (30%), 2 (20%), 1 (10%), and 5 (50%) patients in group-I, group-II, group-III, and group-IV, respectively was observed. A statistically significant difference was obtained when the intervention responses were compared at week-4 (p<0.01), week-6 (p<0.01), and week-8 (p<0.0001) follow-ups in group-I, group-II, and group-IV subjects. At the 8-week follow-up regarding the salivary and mucosal samples, the lowest colony-forming units/milliliter score of C. albicans was observed in group-IV subjects. CONCLUSION: The application of 5-ALA-mediated PDT in combination with nystatin gel possesses the potential as a well-tolerated and safe therapeutic modality for the treatment of patients with HC.

Efficacy of 5-aminolevulinic acid-mediated photodynamic therapy in patients with nicotine stomatitis.

AIM: This study aimed to treat smoker's palate (SP) using 5-aminolevulinic acid (5-ALA)-mediated photodynamic therapy (PDT). METHODS: A total of 24 patients with SP were divided into two groups: group-I (test group; n = 12); and group-II (control group; n = 12). Group-I patients were treated with 5-ALA-mediated PDT, while group-II patients were advised to cease the smoking habit during the entire duration of the study and later. PDT was repeated on days 3, 7, and 14 (i.e., a total of four sittings including day 0 [baseline]). Later, the participants were called for follow-up after week-4 (1st follow-up), week-6 (2nd follow-up), and week-8 (3rd follow-up) after the completion of the treatment. The SPSS version 22.0 was used for data analysis. RESULTS: Group-I patients showed a statistically significant improvement when all three time points were assessed (p < 0.0001). Similarly, the same trend was observed in the group-II participants (p < 0.001), however, the difference between both groups (i.e., group-I [test group] and group-II [control group]) was larger. CONCLUSION: The findings of this clinical trial indicated a promising and satisfactory decrease in the clinical features of the smoker's palate without any adverse impacts utilizing 5-aminolevulinic acid-mediated photodynamic therapy. Hence, 5-ALA-mediated PDT appeared to be a promising treatment option together with smoking cessation.

Determinants of COVID-19 Vaccine Acceptance among Dental Professionals: A Multi-Country Survey.

PURPOSE: This study sought to investigate the acceptance rate and associated factors of COVID-19 vaccines among dentists and dental students in seven countries. MATERIAL AND METHODS: A structured questionnaire prepared and guided by the report of the SAGE Working Group on Vaccine Hesitancy was distributed among groups of dentists and dental students in seven countries across four continents. RESULTS: A total of 1527 subjects (850 dentists and 677 dental students) participated in this survey. Although 72.5% of the respondents reported their intention to accept COVID-19 vaccines (dentists: 74.4%, dental students: 70.2%), there was a significant difference in agreement between dentists/dental students across countries; generally, respondents in upper-middle-, and high-income countries (UM-HICs) showed significantly higher acceptance rates compared to those in low- and lower-middle income countries (L-LMICs). Potential predictors of higher vaccine acceptance included being a dentist, being free of comorbidity, being well-informed about COVID-19 vaccines, having better knowledge about COVID-19 complications, having anxiety about COVID-19 infection, having no concerns about the side effects of the produced vaccines and being a resident of an UM-HIC. CONCLUSION: The results of our survey indicate a relatively good acceptance rate of COVID-19 among the surveyed dentists and dental students. However, dentists and dental students in L-LMICs showed significantly lower vaccine acceptance rates and trust in COVID-19 vaccines compared to their counterparts in UM-HICs. Our results provide important information to policymakers, highlighting the need for implementation of country-specific vaccine promotion strategies, with special focus on L-LMICs.

Glass fiber post resistance to dislodgement from radicular dentin after using contemporary and conventional methods of disinfection.

AIM: The present study aimed to assess the bond integrity of curcumin photosensitizer (CPS) Photodynamic therapy (PDT) on fiber post disinfection bonded to radicular dentin in comparison to the conventional fiber post sterilant used. MATERIALS AND METHODS: Fifty human permanent single-rooted premolars were utilized with the crown part sectioned using up to the cementoenamel junction. Root canal preparation was performed followed by canal obturation with gutta-percha (GP) and resin-based sealer. The post space was prepared using peso reamers leaving 4 mm at the apical part of the post space. Fifty glass fiber posts (GFP) were divided into five groups based on the surface disinfectant (n = 10). group 1: Autoclave sterilization (AS) group 2: chlorhexidine digluconate (CHX dig), group 3: CPS solution, group 4: 35% phosphoric acid (PA) gel, and group 5: No disinfection. Cementation was performed using dual-cure self-etch resin cement. Each tooth was sectioned and placed on the universal testing machine. Failure mode was analyzed using a stereomicroscope at 40x magnification. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey multiple comparison tests. (p = 0.05). RESULTS: Intragroup comparison analysis demonstrated that group 2 in which 2% CHX dig was used as a post-surface disinfectant revealed the highest bond integrity at all three levels. Group 5 where no disinfectant was used to decontaminate the post surface exhibited the lowest bond values. In all the investigated groups, PBS values showed a downward trend from coronal to the apical third of the post space. Group 1 in which AS was used to sterilize the fiber post and group 3 in which CPS was smeared to decontaminate the GFPs surface-displayed comparable outcomes of PBS to group 5 specimens at all three levels. (p > 0.05). CONCLUSION: CHX dig and PA post-surface disinfection displayed a positive impact on bond strength with the radicular dentin. However, CPS and AS do not reveal any effect on the PBS when used for post-decontamination.

Clinical Success of Screw-retained Dental Implants: A Systematic Review.

OBJECTIVE: The objective of the research was to review the literature on clinical evaluation and success of screw-retained dental implants by assessing the marginal bone loss (MBL). METHODS: Online electronic databases such as PubMed/MEDLINE, Google Scholar, and Cochrane Library were searched using appropriate keywords for the last 20 years, dated from January 1, 2000, till August 1, 2021, with a restriction on language. Additional sources like major journals, unpublished studies, conference proceedings, and cross-references were explored. Information curated for data extraction included methodology, population, type of implants used, and duration of follow-up. RESULTS: The PubMed/MEDLINE, Google Scholar, Cochrane Library, and additional sources identified a huge number, out of which 637 search results were screened, out of which 322 were duplicates. The remaining 315 unique studies were screened for the titles and abstracts, and 23 articles were selected for full-text screening. A total of six articles that matched the eligibility criteria were processed for qualitative analysis. CONCLUSION: Despite the uncertain retrievability of screw-retained implant-supported fixed restorations, this treatment option in fixed implant prosthodontics is a reliable and effective choice, especially for implant-supported long-span fixed partial dentures (FPDs), full-arch FPDs, and cantilever FPDs.

Collagen Structure, Synthesis, and Its Applications: A Systematic Review.

Resorbable collagen has been utilized to treat wounds, close graft, and tooth extraction sites, and enhance recovery. Collagen-based membranes are also used as barriers in periodontal and implant therapy to limit epithelial migration and allow cells with the regenerative capacity to fill the problem area. This systematic review was carried out to analyze the studies focusing on collagen structure, synthesis, and its applications. A detailed and extensive search was performed with the help of the keywords "collagen structure", "collagen synthesis" and "collagen applications". There was extensive literature search in reliable and authentic databases like PubMed, Scopus, Web of Sciences, Ovidsp, and Cochrane library to obtain papers focusing on collagen structure, synthesis, and applications. During the systematic review, data were obtained concerning the following parameters. Type of study, nature of aim of the study, size of the sample in the study, gender and age of the subjects included in the study, prevalence of skin diseases where collagen was used for treatment, dose of collagen used, form in which collagen was used, the origin of collagen used, analysis of different variables, structure, and synthesis of collagen. Twenty-two studies were included in this systematic review. The studies discussed the structure, synthesis, and applications of collagen in treatment. In studies focusing on the application of collagen supplements, most of the study subjects were females (68.3%). The study subjects included both healthy and unhealthy subjects. The study subjects were divided into two categories. One category was the intervention group, while another group was the placebo group. Collagen was administered in hydrolysate form (90%) in some studies, bovine form (2.3%), and porcine form (3.4%) in other studies. Collagen supplementation was found to provide better results in both healthy and unhealthy effects in improving the health of skin, cornea, bone, periodontium, face, etc. It can be concluded that collagen is an integral part of the body. The application of collagen supplements can be pretty effective in maintaining the proper health of several important structures of the body like skin, face, cornea, nails, periodontium, etc. Thus, a detailed study of the molecular structure of collagen and genes associated with each type of collagen is essential for further research and treatment of collagen-associated disorders.

Noncarious cervical lesion pretreated using antimicrobial photodynamic therapy and diode laser in reducing dentin hypersensitivity bonded to different restorative material: Valuation of bond values and invitro dye leakage.

AIM: The present study aimed to appraise the effect of Diode laser (DL), riboflavin, and curcumin on the bond strength of adhesive restorative material and the effects of pretreatment on microleakage scores. MATERIAL AND METHODS: Ninety caries-free human permanent premolars were obtained and disinfected. All specimens were mounted till CEJ. To provide standardization, a 2 × 2 mm flat non-carious cervical lesion (NCCL) dentin surface was exposed. This was followed by dentin surface roughening/cervical groove preparation with a round bur. After tooth surface preparation, ninety specimens were divided arbitrarily into three groups. Group 1: NCCL exposed to DL; group 2: NCCL pretreated with riboflavin photosensitizer (RFP) and group 3 pretreated with curcumin photosensitizer (CP). All the three groups were further divided into two subgroups A1, A2, B1, B2, C1, and C2 based on the restorative material used (n = 15). Subgroup A1, B1, and C1 were restored with composite resin (CR). Subgroup A2, B2, and C2 were restored with RMGIC. Ten samples from each subgroup were evaluated for shear bond strength (SBS) testing under a universal testing machine (UTM). Five from each subgroup were evaluated for microleakage assessment. Bond strength and microleakage analysis were performed using analysis of variance (ANOVA) with a Post-hoc test (Tukey's post hoc test) at a significance level (p = 0.05). RESULTS: The group A1, DL-CR shows the highest SBS (16.41± 0.4 MPa). However, CP-RMGIC groups demonstrated the lowest bond integrity. RFP-CR and the DL-CR group displayed comparable outcomes of SBS (p>0.05). The highest microleakage was observed with CP-RMGIC. The least microleakage was displayed by DL-CR. CONCLUSION: Noncarious cervical lesions pretreated with diode laser and riboflavin photosensitizer showed better shear bond strength and reduced microleakage when bonded to composite resin than non-carious cervical lesions pretreated with curcumin.

Assessment of push-out bond strength of post-surface pretreatment before salinization using hydrogen peroxide, aluminum trioxide, and natural photosensitizers to radicular dentin.

OBJECTIVE: The study aimed to evaluate the effect of different post surface pretreatment methods i.e., 24% hydrogen peroxide (H2O2), riboflavin photosensitizer (RFP), curcumin photosensitizer (CP) and aluminum oxide (Al2O3), and silane only on the bond values of glass fiber post to resin cement MATERIALS AND METHODS: Fifty single-rooted human teeth were obtained and crowns were sectioned coronally to the cementoenamel junction (CEJ). Protaper universal file system was used for canal cleaning and shaping followed by obturation. Post space was prepared and all the posts were then randomly divided into five groups depending on the surface pretreatment used (n = 10). Group 1: 24% H2O2 + silane, Group 2: RFP + silane, Group 3: CP + silane, Group 4: Al2O3 + silane, Group 5: silane only. Post-surface treatment was followed by post-placement using a self-etch dual-cure cement Panavia F 2.0. Acrylic blocks were used to hold the specimens perpendicularly and all the samples were sectioned by slow-speed saw into coronal, middle, and apical third. The universal testing machine determines pushout bond strength and failure mode was analyzed by stereomicroscope. One-way analysis of variance (ANOVA) and Tukey multiple comparison tests were used to analyze data. RESULT: The coronal section of group 4 (Al2O3 + silane) displayed the highest PBS (8.23±0.14 MPa). Whereas, an apical third of group 2 (RFP + silane) exhibited the lowest PBS (2.02±0.12 MPa). PBS values in samples in group 1 surface treated with 24% H2O2 + silane displayed comparable outcomes to samples in group 4 at all three levels (p>0.05). Samples in group 2 (RFP + silane) group 3 (CP + silane) and group 5 (Silane Only) demonstrated comparable PBS (p>0.05). CONCLUSION: Glass fiber reinforced post-surface pretreatment method using hydrogen peroxide and aluminum trioxide along with silane improves push-out bond strength at all three levels (coronal, middle, and apical). The use of a silane coupling agent on glass fiber posts alone does not improve bond values. The practice of photosensitizer on post-surface needs to be investigated further.

Radicular canal disinfection by photosensitizers activated by photodynamic therapy and Er, Cr: YSGG laser bonded to glass fiber post using different cement types. An Invitro study.

AIM: To assess the tensile bond strength (TBS) of conventional glass ionomer cement (GIC) and resin cemented fiber post to radicular dentin when disinfected with different photosensitizers methylene blue photosensitizer (MBP), curcumin photosensitizer (CP), and laser therapy Er, Cr: YSGG laser (ECYL) MATERIAL AND METHODS: Sixty carefully extracted, non-traumatic, non-carious, closed apex human mandibular premolars were collected. Periodontal fibers, plaque, or calculi were detached. Decoration of samples was executed up till the cementoenamel junction. Samples were embedded perpendicularly in a heat cure acrylic resin. Canals of all specimens were shaped and cleaned with Protaper universal NiTi system dehydrated with paper points and obturated with gutta-percha. Post space was prepared after the removal of gutta-percha via peso reamers. Post space was disinfected with MBPv100mg/L in group 1; group 2 500 mg/L and group 3 ECL. After sequential photo-irradiation therapies, fiber post was luted with resinous cement and GIC (n = 10 each). After post-cementation, all specimens were subjected to tensile strength in the universal testing machine in Newton. Failure analysis was assessed at 30x magnification.TBS determination was statistically analyzed by one-way variance analysis (ANOVA), followed by the Tukey test (p= 0.05) by parallelizing different groups. RESULTS: Fiber post cemented to radicular dentin with Rely X ARC resin cement and radicular canal disinfected with CP offered the highest TBS (289.25±3.27 N). Similarly, canal space disinfected with MBP and post-luted via Rely X ARC showed the lowest TBS (281.54±4.46 N). Intragroup comparison unveiled that there is no statistical difference between tensile strength sustained by two luting cement (p>0.05). CONCLUSION: Rely X ARC resinous cement bared the highest tensile bond strength for a post-dentine-cement bond with different photo-activated canal disinfectants (Methylene blue photosensitizer, Curcumin photosensitizer) and Er, Cr: YSGG then Vidrion C (GIC).

Use of Rose Bengal, Methylene blue and Curcumin Photosensitizers activated using light emitting diode on post space disinfection bonded to fiber post: An assessment of extrusion bond strength.

OBJECTIVES: To evaluate the effect of Rose Bengal (RB), methylene blue (MB) and curcumin used as a canal disinfectant on the extrusion bond strength (EBS) of FRCP (fiber reinforced composite resin) with canal dentin. METHODS: The present invitro study was completed in 90 days approved by Riyadh Elm University. Forty premolars were extracted disinfected and decoronated. Mechanochemical preparation was done of canal space using 10k file widening canals sequentially with a 25K file with constant saline irrigation. Canal was dried condensed with gutta percha and sealer. Post space was prepared using peso reamer. Based on canal disinfection samples were divided into four groups. Group-1 MBP+17%EDTA, Group-2 RBP +17%EDTA, Group-3 Curcumin+17%EDTA and Group-4 5.25% NaOCl +17% EDTA. Following disinfection, the canal space of all specimens was washed with 17% EDTA for 120 sec. Post was cemented in canal space and cured. Specimens were placed on Universal testing machine (UTM) for EBS. The type of bond failure was evaluated using stereomicroscope. ANOVA and Tukey multiple comparison test was used to compare means. RESULTS: Cervical third of Group-3 in which samples were disinfected with CP+17% EDTA displayed the maximum EBS (8.69±1.32 MPa). Whereas, the lowest EBS (3.30±0.54 MPa) was exhibited by the apical third of Group-4, where 5.25% NaOCl +17% EDTA was used as a canal disinfectant. The intragroup comparison demonstrated a declining trend of EBS from cervical to apical third in all investigated groups. CONCLUSION: Root canal dentin treated with different PS (MBP, CP, and RBP) demonstrated better EBS than the conventional disinfecting regime (NaOCl +17% EDTA). CP and RBP displayed better EBS than MBP.

Mandibular pre-molars endodontic anatomy and role in sex dimorphism for Western Asia population using CBCT 3d imaging technique / Anatomía endodóntica de premolares mandibulares y papel en el dimorfismo sexual para la población de Asia Occidental utilizando la técnica de imagen 3d CBCT

SUMMARY: Cone Beam Computerized Tomography (CBCT) imaging technique can be used for identifying the root canal anatomy and its use in determining sexual dimorphism. The aim of current study was to identify the commonly found root canal morphology and gender dimorphism for mandibular pre-molars in Western Asia population according to Vertucci's classification using CBCT 3D imaging technique. On ethical approval 470 patients from Western Asia population with intact healthy mandibular first and second pre-molars were included in the study. The selected patients were sent to radiology department of Riyadh Elm University, Saudi Arabia for CBCT images. The observations recorded included: i) number of roots; and ii) type of root canal morphology based on Vertucci's classification. All the mandibular first and second pre-molars had single root both in males and females. The type of Vertucci's classification commonly observed was Type I both in males (88.94 %) and females (100 %) in mandibular first pre-molars. Similarly Type I was identified as a common root canal configuration in mandibular second pre-molars for males (82.77 %) and females (100 %). The two canal configurations Type IV and V were only observed in the males. It can be concluded from the results mandibular first and second pre-molars in the Western Asia population are single rooted with common Vertucci's Type I canal configuration in the females with rare evidence of two canals in males. Additionally CBCT is an effective technique and should be used for detection of root canals in the mandibular pre-molars which can aid dentists in providing a successful endodontic therapy.

RESUMEN: La imagen de la tomografía computarizada de haz cónico (CBCT) se puede utilizar para identificar la anatomía del conducto radicular y para determinar el dimorfismo sexual. El objetivo del estudio fue identificar la morfología del conducto radicular y el dimorfismo de sexo, comúnmente encontrados en los premolares mandibulares en la población de Asia occidental, de acuerdo con la clasificación de Vertucci, utilizando la técnica de imágenes CBCT 3D. Tras la aprobación ética, se incluyeron en el estudio 470 pacientes de la población de Asia occidental con primeros y segundos premolares mandibulares sanos intactos. Los pacientes seleccionados fueron enviados al departamento de radiología de la Universidad de Riyadh Elm, Arabia Saudita, para las imágenes CBCT. Las observaciones incluyeron: i) número de raíces; y ii) tipo de morfología del conducto radicular según la clasificación de Vertucci. Se observó solamente una raíz en los primeros y segundos premolares mandibulares tanto en hombres como en mujeres. El tipo de clasificación de Vertucci comúnmente observado fue Tipo I tanto en hombres (88,94 %) como en mujeres (100 %) en los primeros premolares mandibulares. El Tipo I se identificó como una configuración común del conducto radicular en los segundos premolares mandibulares para hombres (82,77 %) y mujeres (100 %). Ambas configuraciones de canal Tipo IV y V solo se observaron en los varones. Se puede concluir a partir de los resultados de los primeros y segundos premolares mandibulares en la población de Asia occidental, que éstos tienen una sola raíz con una configuración de canal de Vertucci Tipo I común en mujeres con una evidencia de dos canales infrecuente en los hombres. La CBCT es una técnica eficaz y debe usarse para la detección de conduc- tos radiculares en los premolares mandibulares, lo que puede ayu- dar a los dentistas a proporcionar una terapia endodóntica exitosa.

Clinical Evaluation of the Effects of Topical Indocyanine-green Mediated Photosensitiser vs Aloe Vera Gel as Adjunct Therapy to Scaling and Root Planing in Chronic Periodontitis Patients.

PURPOSE: To clinically evaluate and compare the efficacy of indocyanine green mediated photodynamic therapy (PDT) and aloe vera (AV) gel when used as adjunct therapy to scaling and root planing (SRP) for treatment of chronic periodontitis. MATERIALS AND METHODS: One hundred fifty patients were randomly assigned to three treatment groups: group 1 (SRP), group 2 (SRP+PDT) and group 3 (SRP+AV). Four clinical parameters - plaque index (PI), bleeding on probing (BoP), periodontal (PD) pocket depth and clinical attachment level (CAL) - were evaluated at baseline and 3 and 6 months post treatment. Additionally, the amount of three inflammatory - cytokines IL-6, IL-8 and TNF-α - in gingival crevicular fluid (GCF) was identified using an enzyme-linked immune-sorbent assay (ELISA). RESULT: Statistically significant improvement was observed for all clinical parameters in group 3 at follow-up in comparison to groups 1 and 2. Individuals treated with adjunct PDT showed statistically significant reduction in moderate (4-5 mm) and deep (≥6 mm) PD pockets at the 3-month follow-up. Group-2 and -3 patients displayed statistically significant reductions in cytokines IL-6, IL-8 and TNF-α at the 3-month follow-up in comparison to group 1 patients. This reduction in cytokines was maintained at the 6-month follow-up. CONCLUSION: Adjunct treatment regimens PDT and AV gel statistically significantly contributed to decreasing inflammation in periodontal tissue. AV /gel showed potential to decrease BoP, whereas PDT can facilitate increasing the clinical attachment level.